Regency Fold-A-Way

Slender aluminum frames add just the right accent to your room decor.


Regency Fold-A-Way Bright White Finish

Regency Fold-A-Way Door Panels


Bright White | Champagne Gold | Bright Gold

Regency Fold-A-Way Standard Features

  • Heavy gauge aluminum extrusions.
  • 5/32" mirror quality float plate mirror.
  • Safety Web anti-shatter backing, Category II.
  • Slender 3/8" wide framed panels.
  • Mirror set in vinyl gasket in frame.
  • Stile mounted aluminum door pull matches door finish.
  • Available Finishes: Champagne Gold, Bright White, Bright Gold, Bright Chrome and Brushed Nickel.
  • Standard Sizes: Widths 2 panel units 24", 30", 36". 4 panel units 48", 60", 72".
  • Standard Heights: 6'-8" (80 1/2") and 8'-0" (96")
  • Special Sizes: Available in all finishes.

Regency Fold-A-Way Cross Section Detail Drawing

Architectural Specifications

Frameless closet doors shall be American Mirror Door® Vista™ Fold-A-Way™ consisting of a pair of aluminum frameless door panels joined at the top and bottom by hinges of concealed design that prevents over closing of the door.

The framed stiles support the mirror panel securely in a vinyl gasket. The rails shall provide a mechanical fitting at the top and bottom.

Each corner shall have one corner block fastened to both stiles and rails by means of three screws. Corner blocks shall have two cavities to accept either self-contained spring-loaded guides and top pivot or vertically adjustable bottom pivot.

Snuggers, which are retained in the top and bottom tracks, snug the door when it is fully closed. The lower pivot is vertically adjustable over a range of 7/8" (22mm) by means of a nut, which turns on a threaded bolt in the body of the pivot and engages a horizontally adjustable pivot bracket retained in the top track.

The top and bottom track shall be extruded aluminum. Both tracks shall match the stile and rail. A metal pull attached to the stile of the jamb door is used to operate the door. The pull finish shall match the stile, rails and tracks.

The stiles, rails, handle, and tracks shall have a baked enamel paint finish in Champagne Gold or Bright White. Brushed Nickel, Bright Chrome and Bright Gold shall be brite dip anodized finish.

Mirror shall be 5/32"(4mm) thick, with polished penciled edge using Mirror Quality Glass conforming to ASTM C1048, Type 1-clear, Quality q2-mirror.Safety Web backing shall conform to Category 2 impact test. Approved for walk-in closet applications. Meeting the requirements of CPSC-16CFR1201 with ANSI Z97.1 test procedures.